Skip to main content
-
I would like to order a set of comp cams pushrods. What is the process? Do I have to get roller tipped roller rockers as well? If yes, could you source them for me please?
-
I would like to purchase one of Mace's tunes for my VY Calais supercharged V6. I would like to acheive an improvement in throttle response, more power and an improvement in fuel economy. currently avg (13.5l/ 100 km) city driving,
I currently have ,
- 10
-
I would like to purchase the VE Alloytec CAI? Can I pick this item up?
-
I would like to run more than 10psi in my car but I can't find any information about what can safely be run in a car with basic modifications such as intake, exhaust and tune.Also with the tune does it need to be fully tuned or can i get a memcal or compu
-
I'd just like to know what the difference is between the VX and VY throttle body? As I have an L67 VY.
-
I'd really like to hear your thoughts on the possibility of the 400hp aim in N/A and will be looking forward to going ahead with it if it is possible within reason?
-
I'll soon be doing an L67 conversion on my VT. Before I do it though is an L67 ist straight swap from the ecotec? I just need the Memcal for an l67, wiring looms, injectors and o2 sensors? Other than that is it pretty much put it and away it goes?
-
I'm about to do a rebuild on my l67 which has a spun bearing i have a new crank to go in but I'm having trouble finding big end bearings.Does Mace offer any and how oversize you would recommend the bearings be.?The car has done 550000 with the original e
-
I'm buying a 17" psi pulley but I have the standard L67 snout. Can I buy a snout machining tool to machine the end of it and does Mace sell one? Also would like to know what's involved in doing it and how much it will cost to send to Bendigo Vic 3550?
-
I'm currently trying to read my ECM and it gets to about 70% and stops ?
-
I'm in the process of doing up an L67motor and I want to stroke it. Is there a cam that would be beneficial or suit the stroker kit?
-
I'm interested in purchasing a mace cold air intake kit for my vz commodore sv6. Was just wondering if your manifold insulators for the vz would fit with my mace intake kit?
-
I'm interested in your ossrom OTR and tune package for the SIDI SV6, I have a series 2 Ute with a growler intake at the moment and just aftermarket mufflers and the rest is stock as a rock with your package i was wondering whether or not it comes with a d
-
I'm looking for a Custom VR V6 Manual Memcal tuned to suit an Ecotec transplantwith my supporting modifications so I can get the best out of the package
-
I'm looking for a Low temperature thermostat for an LS1, do you have anything to suit?
-
I'm looking into getting my 2014 Cruze SRI tuned and was wondering if the tune formates the whole system and override all existing data or is there still evidence of the previous tune? I ask this as I don't wish to void my warranty with Holden and would l
-
I'm looking to get some roller rockers for my VY SV6 with some tax money and not sure what to get.Should I be getting high or ultra high roller rockers? The car has extractors and exhaust, looking at the plenum and manifold insulators maybe as well if the
-
I'm looking to upgrade the boost on my L67 VY Calais. I'm planning on buying a CAI and I'm wondering what the possibilities for boost pressures are if I was to run a CAI and a tune. Is it possible to run more than a 3.4" pulley with a tune?
-
I'm not sure if the tune on yours has any changes to transmition shifts as I'm running original mitsubishi diff , it seems like top gear is around 70 Km , trying to get economy down on a Mitsubishi L300 Van with an L67 supercharge.
-
I'm swapping a 2000 model VX Commodore L67 motor into my 2003 model VY series 2. I'm trying to sort out the wiring as my vy commodore doesn't have the 3 main plugs that are at the rear driver side of the hood like the VX. Do you guys do a wiring kit to fi
-
I'm wanting to have my blower and inlet ported for W2A intercooling as I want to cool it in the future. At this stage I will be running it with a 25mm insulator would I have to change the shape of the outlet of the insulator to suit the W2A porting for
-
I've acquired a L67 from a damaged VT commodore which I have just found out it was from a deceased estate and hasn't been run for approx 10 years! I have since done a conversion into a rodeo, along the way, having a few issues with the electronics! I now
-
I've been looking for an inlet adapter for a MP90 supercharger for ages and am having no luck in finding one.
Magnuson used to make them but have said they have none in stock and can't help me.
What I'm after is something simillar to the 78 mm Passenger
-
I've been offered to buy a 3" intake pipe with a MAF to go with it for a VZ 05 wagon Executive. Do you believe a 3" intake pipe (steel pipe) would be beneficial over the stock intake pipe? Please advise?
-
I've been reading on the L67 forum about the DIY vs fuel rails to suit L67s with A2A. Was just wondering if you will be making them and selling them?
-
I've been told I could put a supercharged L67 motor in my commodore and run the same loom and ecu all I need is a memcal suited. Is this correct?
-
I've done the 10 psi pulley upgrade on my otherwise stock L67 VT. How do these rockers work with that?
-
I've got a L67 supercharged motor. It's in a Toyota hiace. Yes it was fun getting it in and is a great motor. I'm looking for a boost upgrade for it. How much boost on the standard computer will it take. I heard you can run an XU6 chip and go to 10lb. Is
-
I've got a twin throttle body manifold with two 69mm bored out throttle bodies. How much airflow would it create?
-
I've got a VY auto ecotec, where I have machined 30 thousands off the heads which should have taken the compression to around 10:1, I’ve fitted the ultra high ratio rockers and the heads are hand ported. I've also fitted the 12mm manifold insulator and 12