Skip to main content
-
I want to install a cam and headers on my VE SV6, can you tell me who you supply to carry out the work.
-
I want to install an exhaust on my VE SV6 2010 model to make it sound tuff not droney or anything.What system do you recommend without spending too much money something under the $1000 mark?
-
I want to know if I can get throttle body spacers or a throttle body for improved power for my 2007 Chevrolet Lumina alloytec v6 otherwise known as Holden commodore v6 in Australia and Pontiac G8 in North America.
-
I want to modify my Ecotec VY. I want to get a cam, rockers springs etc. Is there a good package that you do that gives good RWKW? And how much would it cost?
-
I want to purchase a 69mm throttle body but unsure as to which one I need the VX or the VY one, there 2 different IAC one has a big end and one has a small end, the big one isn't available anymore only the small.
-
I want to purchase a cam for my ecotec and I was told that I can only go for stage 2 as I have the 1.95 roller rockers. If its true how much is the stage 2 cam and will it sound lumpy and will it still run with the stock engine control unit?
-
I want to purchase the cold air intake for my Nissan petrol 3L RB30 and just wondering if this will suite my car?
-
I want to purchase the BOSCH 36LB/H INJECTORS for a supercharged V6. Do you sell these injectors separately or do I have to buy all six? If so, whats the best deal you can do on a whole new set?
-
I want to replace my inlet manifold gasket on my L67. I am aware I need a supercharger gasket and o rings, but do I need and head gasket as well?
-
I want to turbo my L67 engine. So can i just change the intake manifold or do I need to put the Ecotec heads too?
-
I wanted to confirm if I could fit a MACE/VCM OTR to my LFX engine? I had the OTR on my 2011 VE SV6 LLT Engine but I understand the radiator mounts have changed on the LFX.
-
I wanted to convert my Ecotec engine into L67, so I could essentially get an L67 and bolt it up to the same mounts as my ecotec?
-
I was advised to use 105 lbs springs as I am looking to use the Mace COMP Cam with 1.8 rockers and stock valve springs, but that means I have to remove my balance shaft which I don’t like as I'm sure the engineers at GM put it there for a reason.
-
I was advised to use 105lbs springs as I am looking to usethe Mace COMPCam with 1.8 rockers and stock valve springs, but that means I have to remove my balance shaft and run a double roller. I've heard a few horror stories of people using 105lbs springs w
-
I was considering installing your 1.9 rockers but it seems that they only perform above 3000 rpm, I very rarely go above 2500 rpm unless on the open road and over taking so would it be beneficial for me. Please advise?
-
I was doing a 4:11 locked rear end and full exhaust on my VS V6 do you think the Stage 3 Comp Cam package would be suitable ?
-
I was interested in a tune for a Holden cruze 1.4 turbo sedan 6sp manual. I have done up an custom intercooler kit and 2.5' turbo back exhaust with a cold air intake system.could I get a quote for a tune?Will it still be good on fuel as the customer doesn
-
I was interested in your Pod Filter kit, I already have a aftermarket pipe. Will the pod affect the sound?
Does it add any performance and where does the air enter the box as the old pipe at the front of bonnet is removed?
-
I was just curious on the material that's used for your manifold insulators?
-
I was just curious on the material that's used for your plenum spacers?
-
I was just wondering about Supercharging my 1997 VT Commodore, I want the biggest
Twin Screw Valley Mount Supercharger I can get thats Legal. Another option would
be to get the biggest Vortec Belt Driven Supercharger I can get thats Legal. The engine
is
-
I was just wondering about the VE SV6 SIDI Cams. Is that the full package for $1290 ready to install and don't need any other parts?
-
I was just wondering does Mace make a COLD AIR INTAKE MANIFOLD INSULATOR to suit LS1 V8 engines?
-
I was just wondering if the W2A intercoolers have to be pressurized like the cooling for the engine?
-
I was just wondering if you guys are able to bore out a stock standard hyundai getz throttle body to a bigger size? If so are we able to have a price to do this please, and we are also able to supply/send a throttle body to you.
-
I was just wondering what parts I need to make my VX V6 GTS replica sound close to a V8 it already has a full exhaust and your mace cold air intake. I have been told that if anyone would know how to make my car sound like a V8 it would be you guys.
-
I was just wondering what price I would be looking at to purchase a cable to plug into my ECM outright and how much a flash tune is?
-
I was just wondering if you sell twin throttle body manifolds for VY V6 Ecotec?
-
I was looking around ebay for a SS inductions growler kit for my VT, and I am sure you know they are like $450-$500 which is ridiculous.
-
I was looking around the website and noticed the crow cams for higher ratios. What kind of power figures would you expect (normally) compared to stock? Which would you recommend, stock rollers with stage 2 comp or stage 2 crow with current yella tera rock