This combination of products is recommended for those who are not interested in intercooling at this stage and are chasing a full stealth look underneath the bonnet.
- Boost upgrade kit
- Cold air intake for VS L67 V6 / Cold air intake for VT-VY L67 V6
- Cooler thermostat
- Bored out throttle body (95-02, 02-04)
- Comp Camshaft
- Crow cams heavy duty valve springs
- LS1 retainers
- Rollmaster double row timing chain*
- machined oil pump cover
- Viton valve stem seals
- Comp valve locks
- Crow cams heavy duty hydraulic lifters
- Crow cams heavy-duty pushrods
Power figures will vary depending on a variety of factors including but not limited to; selected camshaft, engine condition, pulley size, transmission and dyno used. A full exhaust system is highly recommended. A custom dyno tune is mandatory following a camshaft upgrade. Please contact us for performance workshops we can recommend around your area who specialize in these motors.
In order to run a double row timing chain, the balance shaft must be disabled by removing the sprocket off the end of the shaft. While complete removal of the balance shaft is possible and would result in the same outcome, it would require the oil gallery to the rear bearing of the balance shaft blocked off. Failing this, virtually zero oil pressure would result on startup.
Comments
0 comments
Please sign in to leave a comment.