Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Activity overview
Latest activity by Michael-
Michael created an article,
What material are the MACE manifold insulators and plenum spacers made from?
Our manifold insulators and plenum spacers are manufactured from a high-quality, heat-resistant thermal composite plastic. This material is specifically designed to reduce heat transfer, improving ...
-
Michael created an article,
What is the difference between the thicknesses of the MACE manifold insulators (6.35mm, 12mm, and 25mm)?
The main difference between the manifold insulator thicknesses is the level of torque increase they provide: 6.35mm – around 10% more low-end torque, 12mm – around 13% more low-end torque, 25mm – a...
-
Michael created an article,
What material are the MACE manifold insulators and plenum spacers made from?
Our manifold insulators and plenum spacers are manufactured from a high-quality, heat-resistant thermal composite plastic. This material is specifically designed to reduce heat transfer, improving ...
-
Michael commented,
Hi Eran,Please accept our sincere apology for the delay in getting back to you. The return was received on 24th and after inspection, your refund was made yesterday via PayPal against the transacti...
-
Michael commented,
Thank you for sharing the details, and we sincerely apologise for the inconvenience you have experienced. As the issue is occurring with both the original and replacement units, it is unlikely that...
-
Michael created an article,
-
Michael created an article,
What is the pre load on the SPG606?
0.070-inch preload
-
Michael created an article,
Do you know what are the torque specs for these mace 12mm head studs ?
In regards to the installation process of these studs and torque setting, please refer to the following link.https://www.youtube.com/watch?v=Wf91JhmIAwA&t=130s
-
Michael created an article,
Does the VCM OTR COLD AIR INTAKE BUNDLE KIT FOR HSV CLUBSPORT VE LS2 LS3 6.0L 6.2 V8 will fit a 102mm throttle body?
Yes, this boot will be able to stretch over a 102mm throttle body. It may need a bit of lubrication to help fit properly.
-
Michael created an article,
With the MACE 12MM PERFORMANCE MANIFOLD INSULATOR KIT to suit VZ VE Alloytec V6, Will the Standard Engine Cover Still Fit Under The Bonnet?
Yes you can refit the engine cover with no problems once these are installed.You can check out the install instructions here:http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shop...