Roller Rockers & Covers
- How much lift would these rocker arms "HIGH RATIO ROCKER & PUSHROD KIT FOR HOLDEN COMMODORE VU VY ECOTEC L36 3.8L V6" add to the camshaft?
- Is it only half we buying or is it both sides of the block?
- I recently purchased some 1.98 ratio rockers for my Holden VU II Storm and now the engine has a constant ticking sound, these where installed by a licensed mechanic as well and are fitted 100% correctly, are you aware of what may cause this sound, also th
- Hi there, do HOLDEN HIGH RATIO ROLLER ROCKERS TO SUIT BUICK 3800 V6 fit with standard valve covers?
- I am interested in your Rocker Arms (1.9) for my 2001 lq4 engine (6.0) with 2006 Corvette camshaft and twin turbo set-up....Lowboost....around 12 lbs max....I was wondering if you feel that your rocker arms will be strong enough to handle this set-up
- how do i choose which rockers to use between the high and ultra high?
- should i just scrap the spacers and get the high ratio roller rockers?
- What is the length of your rocker bolts to suit ECOTEC V6 & L67 (BPROC601)
- The MACE RE-USABLE ROCKER BOLTS TO SUIT ECOTEC V6 & L67 are these the same as a 8.8 grade bolt?
- Do you need the new PCM/memcal if you install high ratio roller rockers and lifters to suit ECOTEC AND L67 V6?
- Do you have Rockers covers to suit Buick
- Can I use Ultra high ratio roller rockers (1.98:1) to suit ECOTEC AND L67 V6 in a VY V6?
- What are the benefits of PERF HIGH RATIO ROLLER ROCKERS HOLDEN VS VU VT VX VY ECOTEC L36 L67 SC 3.8 V6?
- What is the difference between the MACE high ratio roller rockers and the standard one
- What is the material of MACE ROCKER COVER GASKET KIT TO SUIT MAZDA B2600 BRAVO UF UN G6 2.6L I4?
- What is the length of your rocker bolts to suit ECOTEC V6 & L67 (BPROC601)?
- Are the rocker covers and gaskets you supply a direct bolt on option? Can the old rocker cover bolts and rubber bolts seals be still used without the requirement of any other parts?
- Will I Need New Push Rods?
- Can I Use The 'Comp Cam Re-Usable Rocker Bolts' On A standard Engine With Standard/High Ratio Rockers As Replacements For The Factory Items?
- Can Your Aluminium Rocker Covers Be Drilled And Have Fittings Welded On Without Damage For An Oil Catch Can?
- Do The Aluminium Rocker Covers Come With New Gaskets?
- Which vehicles do the Polished Aluminium Rocker Covers fit and do they require modification?
- Do Higher Ratio Rockers, Cams or a Sports Exhaust Lower Boost On A Supercharged Engine?
- Do I Need To Replace Or Upgrade My Valve Springs?
- Do I Need To Upgrade The Pushrods With The High Ratio Rockers?
- Which Rockers Will Be Best In My V6 Ecotec Commodore?
- Why Are The Ultra High Rockers Not Suited To VYs?