Will It Fit/ How Will It Fit Under The Bonnet?

Your best bet would be to take a couple of measurements just to make sure, as every car is different but here is a fitment summary from experience shown below:

• Raising manifold by 12mm: Cover will go on like factory
• Raising manifold by 25mm: Cover will need to be trimmed around the alternator or bonnet liner needs to be removed or trimmed. Otherwise cover will rub on bonnet liner
• Raising manifold by 37mm: Cover will need to be removed. Otherwise cover will rub on bonnet liner/possibly not close depending engine mounts
• Raising manifold by 50mm: Will require bonnet mods without cover