Injector rail extenders are not needed for this item as you can easily modify the fuel rail such that it will still work. What you need to do is cut the supporting tab on the top of the fuel rail such that it is no longer supported by the bolt. This will allow the supercharger to be raised while the rail remains in its original position. Other customers have also left the fuel rail as it is after modification and have reported no problems.
You don't need longer bolts for this item, however, some people have replaced them with longer items during installation. You should use a high-temperature silicone sealant with the plate, ideally though you would want to also use the following gaskets.
Supercharger to Lower Intake Manifold O-Rings
Qty: 1
http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/GSK605
L67 Supercharger Gaskets
Qty: 2
http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/GSK603
Comments
0 comments
Please sign in to leave a comment.