I’m extremely happy with the Inlet Insulator/Gasket it works amazing, but there’s one problem, it didn’t say anything about My A/C Compressor Brackets Not lining up right, because the inlet is spaced out further than what it is meant to be. I’m just a lit

Thanks for the great feedback. Regarding the A/C compressor bracket not lining up, I have these fitted to my BA and your right the bracket does not line up due to the 12mm spacer. My mate also has his fitted to his BF neither of us have refitted the bracket and we have not had any issues and it has been a good 18 months so far. If you would like to refit the bracket you can remove the bracket, and elongate the bolt hole slots on each end this will provide enough play to line up the bracket. You can also space the lower side of the bracket with a few washers and use a longer bolt, doing this allowed me to refit the bracket,. I have since removed the brackets. I used a dremel tool with a carbine bur and cleaned up with a grinding stone both where cone shaped.