Skip to main content
-
I have your 10pound pully on my vt Calais and I cannot stop the belt from squealing have had it on for the same time and have tried soap belt grip ETC but no joy still has a load squeal when cold and just bearable after it warms up can you give me a tip t
-
I just bought an a2a cooler plate. Do I need to buy longer bolts for it to fit under my supercharger? If yes, then what else should I need to buy?
-
I live in the USA. I have some buddy's that ordered spacers for a 09 Pontiac G8 which people say the commodores have in then it's the 3.6 LY7 motor .If you think it will be suitable can you send me a link to one and the price also?
-
I purchased a memcal from Mace some time ago, would any major change be needed in regards to the memcal with installation of HRRR's?
-
I rebuild a L67 motor with 5 speed getrag into my ute and have tried with 5 different memcals and not one of them works . Can Mace offer one which is suitable and for how much?
-
I recently purchased a VS Commodore with the ecotec and it came with a lot of spare parts some of which are Flat top pistons with stainless rings performance valve springs etc. It also came with a cam that i am unable to identify it may only be standard b
-
I recently purchased a VY S with a L67 engine and it has been fitted with a front mount air-to-water intercooler from you guys (along with a stage 2 cam package and all the associated bits) and is currently runnning a 14 psi pulley. Whoever installed the
-
I want to buy chip/memcal for my modified VX Supercharged but i'm not sure if it will make any difference. Can you help me with this?
-
I want to modify my Ecotec VY. I want to get a cam, rockers springs etc. Is there a good package that you do that gives good RWKW? And how much would it cost?
-
I want to turbo my L67 engine. So can i just change the intake manifold or do i need to put the ecotec heads too?
-
I was just wondering about the VE SV6 SIDI Cams. Is that the full package for $1290 ready to install and don't need any other parts?
-
I was wondering, do i need 2 cams for the VT L67?
-
I'd just like to know what the difference is between the VX and VY throttle body? As I have an L67 VY.
-
I'll soon be doing an L67 conversion on my VT. Before I do it though is an L67 ist straight swap from the ecotec? I just need the Memcal for an l67, wiring looms, injectors and o2 sensors? Other than that is it pretty much put it and away it goes?
-
I'm interested in getting a stock 08 ve sv6 commodore tuned is it worth it and what would it cost?
-
I'm looking at buying 9PSI - 11PSI BOOST PULLEY UPGRADE KIT WITH BELT L67 SUPERCHARGED 3.8L V6 for my VT. What else do you recommend to get the most out of it?
-
I'm swapping a 2000 model VX Commodore L67 motor into my 2003 model VY series 2. I'm trying to sort out the wiring as my vy commodore doesn't have the 3 main plugs that are at the rear driver side of the hood like the VX. Do you guys do a wiring kit to fi
-
I'm thinking of converting my holden ve v6 to at LSA superchared engine just wondering all the things I need to change in it. would I have to change engine mounts ? and would all the dash electronics still be compatible with the engine ? would my diff wor
-
I'm wanting to have my blower and inlet ported for W2A intercooling as I want to cool it in the future. At this stage I will be running it with a 25mm insulator would I have to change the shape of the outlet of the insulator to suit the W2A porting for
-
I've acquired a L67 from a damaged VT commodore which I have just found out it was from a deceased estate and hasn't been run for approx 10 years! I have since done a conversion into a rodeo, along the way, having a few issues with the electronics! I now
-
I've been looking at putting a cam in my holden ve sv6 ute. I've noticed that you sell a HOLDEN VZ-VE ALLOYTEC V6 CAM PACKAGE. I was just wondering how lumpy this camp package is? Is it equivalent to a stage 2? Stage 3?
-
I've been looking for an inlet adapter for a MP90 supercharger for ages and am having no luck in finding one.Magnuson used to make them but have said they have none in stock and can't help me. What I'm after is something simillar to the 78 mm Passenger
-
I've been reading on the L67 forum about the DIY vs fuel rails to suit L67s with A2A. Was just wondering if you will be making them and selling them?
-
I've been told I could put a supercharged L67 motor in my commodore and run the same loom and ecu all I need is a memcal suited. Is this correct?
-
I've done the 10 psi pulley upgrade on my otherwise stock L67 VT. How do these rockers work with that?
-
I've got a twin throttle body manifold with two 69mm bored out throttle bodies. How much airflow would it create?
-
I've put a vt l67 in a series 1 vs ute just wondering which A2A intercooler kit would I need?
-
I've upgraded factory l67 pulley and wondering what the spark plug gap spec is for the 87mm pulley upgrade?
-
If I buy MACE STAGE 2 PERFORMANCE CAM PACKAGE HOLDEN L67 SUPERCHARGED 3.8L V6, will it go into my 98 VT L67 stock engine or do I need to do anything else to my motor?
-
If I fit PREMIUM TIMING CHAIN KIT WITHOUT GEARS HOLDEN CREWMAN VZ ALLOYTEC LE0 3.6L V6 to an engine, is it possible to remove and fit another engine later on?