Skip to main content
Mace Engineering Group Help Center home page Mace Engineering Group
Mace Engineering Group
  • Community
  • Submit a request
  • Sign in
  • Sign in
  • Community
  • Submit a request
  1. Mace Engineering Group
  2. GENERAL ENQUIRIES
  3. Holden

Holden

  • Do the Cams you supply affect idle?
  • At Which Part Of The Rev Range Do The Cams Make The Most Power?
  • How Can I Improve My SIDI Holden V6's Acceleration Off The Mark Such That It Takes Off Quicker?
  • Can I Use The 'Comp Cam Re-Usable Rocker Bolts' On A standard Engine With Standard/High Ratio Rockers As Replacements For The Factory Items?
  • Are There Variants Of The Cam Grinds For The Alloytec/SIDI Or Is It Just The One Aftermarket Size?
  • Are These New Cams or Regrinds Of Factory Items?
  • At Which Part Of The Rev Range Do The Cams Make The Most Power?
  • Cams Or CPR6 Manifold?
  • Can You Tune My Car To Suit These (SIDI/Alloytec) Cams?
  • Do I Need To Upgrade The Pushrods With The High Ratio Rockers?
  • Do the Cams you supply affect idle?
  • Will I Need New Push Rods?
  • Can I Use The 'Comp Cam Re-Usable Rocker Bolts' On A standard Engine With Standard/High Ratio Rockers As Replacements For The Factory Items?
  • After The Cam Is Installed - Am I Able To Drive It Without A Tune For A Bit Or Should I Tune It Straight Away?
  • Is There A Thermostat On The Market That Opens At Less Than 82deg?
  • After The Cam Is Installed - Am I Able To Drive It Without A Tune For A Bit Or Should I Tune It Straight Away?
  • 2. Ecotec Bolt-On Package
  • Are You Able to Tune Both the Modes for the PWR Button?
  • Can You Semi-Manualise the Tune?
  • I Noticed after Having Installed the Memcal, the Rev Is Inclined to Hold When the Clutch Is Depressed rather than Drop Down
  • What Memcal Do I Need To Suit The Getrag Gearbox?
  • Are You Able to Tune Both the Modes for the PWR Button?
  • Can You Semi-Manualise the Tune?
  • I Noticed after Having Installed the Memcal, the Rev Is Inclined to Hold When the Clutch Is Depressed rather than Drop Down
  • What Memcal Do I Need To Suit The Getrag Gearbox?
  • Do Higher Ratio Rockers, Cams or a Sports Exhaust Lower Boost On A Supercharged Engine?
  • I have installed an exhaust larger than needed, can you Tune to suit a new larger throttle body?
  • Will changing my 3in exhaust with a 2.25in cat back system affect my current custom tune?
  • 3. L67 3.8L Supercharged V6 Intercooler Package
  • Do Higher Ratio Rockers, Cams or a Sports Exhaust Lower Boost On A Supercharged Engine?
  • « First
  • ‹ Previous
  • Next ›
  • Last »
Mace Engineering Group
Powered by Zendesk