Skip to main content
Mace Engineering Group Help Center home page Mace Engineering Group
Mace Engineering Group
  • Community
  • Submit a request
  • Sign in
  • Sign in
  • Community
  • Submit a request
  1. Mace Engineering Group
  2. GENERAL ENQUIRIES
  3. Holden

Holden

  • If I Were To Install The Stage 2 Comp Cam With 1.9:1 Ratio Rockers Would I Have Any Problems With Lift Clearance Or Would I Have To Revert To A Lower Ratio?
  • What Can I Do To Get More Power Out Of My Supercharged V6?
  • Do the Cams you supply affect idle?
  • Do You Supply Cam And Chip Packages For All 3.8lt Holden V6s?
  • What Components Should I Upgrade When Fitting A Cam To My 3.8 Litre V6?
  • If I Were To Install The Stage 2 Comp Cam With 1.9:1 Ratio Rockers Would I Have Any Problems With Lift Clearance Or Would I Have To Revert To A Lower Ratio?
  • Do The Aluminium Rocker Covers Come With New Gaskets?
  • What Components Should I Upgrade When Fitting A Cam To My 3.8 Litre V6?
  • What do I need to take into consideration when fitting a stroker kit?
  • Do The Crow Cam Hydraulic Lifters Need To Be Primed With Oil Prior To Installation?
  • How Do The Cams Affect Fuel Economy?
  • What do I need to take into consideration when fitting a stroker kit?
  • Do the Cams you supply affect idle?
  • What Components Should I Upgrade When Fitting A Cam To My 3.8 Litre V6?
  • What do I need to take into consideration when fitting a stroker kit?
  • What Does An Alloytec/SIDI With Cams Installed Sound Like? Do You Have Any Videos Or Sound Clips?
  • Do You Supply Race Balancers for Ecotecs (non-L67)?
  • How Hard Is It To Fit Cams?
  • Which Would You Advise, ‘Stage 2 Comp Cam With Standard Ratio Rockers’ Or ‘Stage 2 Crow Cam With Higher Ratio Rockers’?
  • Do The Crow Cam Hydraulic Lifters Need To Be Primed With Oil Prior To Installation?
  • I Was Wondering If A Knock Sensor Is Required To Run The Crow Cam Memcal Package?
  • What Will I Need To Change/Upgrade To Run The CROW Cam To Suit Higher Ratio Rockers?
  • What Will I Need To Change/Upgrade To Run The CROW Cam To Suit Higher Ratio Rockers?
  • What else besides the Cam can help my Alloytec/SIDI V6 gain more response?
  • How Do You Fit/Change A Memcal?
  • Do You Supply Tunes for Stroked Engines?
  • I Was Wondering If A Knock Sensor Is Required To Run The Crow Cam Memcal Package?
  • Will your Stroker Kit Suit My Boosted Engine?
  • Which Would You Advise, ‘Stage 2 Comp Cam With Standard Ratio Rockers’ Or ‘Stage 2 Crow Cam With Higher Ratio Rockers’?
  • My Engine Pings under Hard Acceleration
  • « First
  • ‹ Previous
  • Next ›
  • Last »
Mace Engineering Group
Powered by Zendesk