Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
On what tune does Mace has the stage 3 cam for the L67 chip?
Our stage 3 Cam and Chip package, are provided with our matching tune for that cam, model and transmission type. Unfortunately we don't offer a chip/tune to suit our L67 supercharged cams.
-
On your 10psi pulley upgrade it says 98 octane fuel is required. If I was running standard LPG I know this would harm performance. Please suggest would upgrading to injected LPG help this?
Given the octane rating of LPG, it wouldn't be a problem. In fact you would technically be able to run more boost then 10psi, however to play it safe would only recommend sticking with 10psi. It wo...
-
On your COLD AIR INTAKE TO SUIT HOLDEN VT-VY V6
Headlight was just wondering which way this one goes." Our CAI kit draws air behind the headlight and in between the radiator which is a high-pressure region. To assist in visualizing the airflow w...
-
On your website I can find the throttle body memcal tune for the L67 but I can’t find the throttle body memcal tune for my L36 Ecotec VX? Please help?
The L36 ecotec VX requires a re-calibrated computer/PCM as it does not use a memcal as the L67 version does. Use the drop-down menu to select the correct tune. You can find further details here: h...
-
Once again fitting is easy ( DIY ) there must be something I don't know as I have seen in forums where others cannot remove the plenum lid. I have broken timber trying to lever off.I have run a stanley knife around the seal. I have looked for hidden bolts
You still need to remove the 4 bolts which are hidden under the alloy plenum cover. Please refer to the fitting instructions. When you attempt the install the manifold insulators PLEASE call us so ...
-
Once I have installed the boost upgrade kit, do I need the tool or is it the hub that you can change without the tool?
Once the hub is installed, you can comfortably swap between pulleys using an Allen key to remove the 5 screws holding the pulley to the hub. You don't use the pulley removal installation tool again...
-
Once the 12mm PLENUM/MANIFOLD SPACER is installed is it ready to go?
Yes, it'd be ready to go once installed. You just need to wait for the silicone sealant to dry as per the manufactures specification on the back of the packet.
-
Performance 12mm plenum spacer holden V6 VS-VY suitable for none supercharged/turbo engines?
Yes, it is, but it's also suitable for these engines as well. However, if you have a supercharged or turbocharged engine, then ideally you would go with the 25mm version.
-
Planning on buy a performance memcal to run my 70mm throttle body and 1.97 rockers what does your chip do to run these?
We update spark, fuel and transmission characteristics to take these modifications in to account. Please note that our memcals are only guaranteed to work with our throttle bodies only.
-
Please explain what the memcal does?
A memcal basically stores the engine management system's calibration/tune, which tells how the car's engine management system is to operate under certain engine conditions.