Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
I own a VR Ute with a VN V6 manual engine in it, would your memcal chips still work in my car as I run it on gas as well as petrol?
Yes, our memcal chips would definitely suit your application.
-
I own a VS V6 manual T5 commodore and I bought a stage 2 comp cam and chip and it's great all working well but I have moved up and done head work etc and am now after a bigger cam. I'm thinking about the stage 3 cam from comp cams but I noticed Mace don't
That's correct.
-
I purchased a memcal from Mace some time ago, would any major change be needed in regards to the memcal with installation of HRRR's?
No major changes would be required.
-
I purchased and installed a set of the 1.9 ratio rockers. I installed them as per normal, and they were just a little noisy at start up for the first time and then it went away after about 3 or 4 minutes. I warm up the car every morning, every time it sta
It sounds like a lazy lifter. We can supply you with thinner pedestals to possibly help overcome this however it may still not go away. Am happy to supply them though.
-
I purchased your TB and air flow meter upgrade and I also recently just bought a spacer, will it suit the spacer as well? What will be the postage for the memcal?
The memcal will suit the spacer and throttle body, however, the airflow meter upgrade will require a custom tune. It would be $15.
-
I rebuild a L67motor with 5 speed getrag into my ute and have tried with 5 different memcals and not one of them works. Can Mace offer one which is suitable and for how much?
We've supplied a number of memcals for such conversions in the past with a 100% success rate. In regards to costs associated with purchasing a suitable memcal, please check out the link below: htt...
-
I received the CAI kit to suit my VZ V6, however I got the wrong lid.
You should have received a black lid and a brown lid (cardboard looking). The brown lid is in fact the clear lid with brown protective layers on it. All you need to do is peal these layers back and...
-
I recently purchased a VS Commodore with the ecotec and it came with a lot of spare parts some of which are Flat top pistons with stainless rings performance valve springs etc. It also came with a cam that i am unable to identify it may only be standard b
Unfortunately, the cam part number/serial number is not ours. Therefore, unless you have a cam card, your best bet would be to get the cam inspected on a cam doctor machine to determine what the ch...
-
I recently purchased a VY S with a L67 engine and it has been fitted with a front mount air-to-water intercooler from you guys (along with a stage 2 cam package and all the associated bits) and is currently runnning a 14 psi pulley. Whoever installed the
If installed correctly, there definitely won't be any such issues described long term. This I can personally attest to, based on the number of kits which I installed approximately seven years ago w...
-
I saw on the G8 board that Mace does the programming for the Pontiac G8 also. Is this true?
This is true.