Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
What size of manifold insulator and spacers you can put on a VT ecotec with the engine cover on and still be able to shut the bonnet?
The highest that you can raise the manifold without having to remove your engine cover would be approximately 14mm, therefore you would only be able to install one spacer.
-
What sort of cam set up would Mace recommend for N/A racing application and then a twin turbo racing application?
NA Cams http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/CAM601/SubProducts/CAM601 Turbo Cams http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectP...
-
What sort of changes can I expect in regards to fuel efficiency if I upgrade my Cruze SRI with the Mace tune?
In regards to gains in fuel economy/efficiency these are possible, depending on the calibration regime. Given you have a manual though, this is easily achieved by lowering the boost level below fac...
-
What sort of fuel economy, drivability and torque would I expected after the custom tune?
If a custom tune is done then fuel economy (depending on how it’s driven) and driveability will be similar to the factory.
-
What sort of kw gains would you achieve with your VE SIDI LLT Extreme Build as shown in the link here http://support.maceengineering.com.au/Knowledgebase/Article/View/257/728/3-ve-sidi-llt-extreme-build ?"
You would be looking at gains of around 50-60rwkw.
-
What sort of machine shop work needs to be done when installing ARP Connecting Rod Bolts suitable for Ecotec
Given that the ARP connecting rod fasteners need to be torqued higher then the factory items, you will very likely need to resize the big end of the connecting rod due to the fact that it will beco...
-
What sort of RPM are MACE Flat Top Piston Set Holden commodore VR VS VT 304 5.0L V8 good for?
Conservatively speaking, these pistons would be good for around 6500RPM.
-
What stage is the CAM616 and does it have a good sound?
We only have one stage of cam at this point in time. Certainly, it has a good sound. https://www.youtube.com/watch?v=QVc4EnqPoW4 https://www.youtube.com/watch?v=P4L8W9wNuFg
-
What stroker kits will best suit the V6 out of the different ones available? If looking at stroking and Strengthening V6?
Please view our stroker packages under the part number STRK601, STRK607 and STRK608.
-
What's a second hand Supercharger kit worth?
We do not deal with second hand superchargers so we are not sure what they are worth. It will depend on the type of supercharger your after. You can have a look at ebay or related automotive forums...