Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
I have just installed a stage 3 Crow cam package including heavy valve springs, hyd lifters, timing chain
The characteristics [I]may[/I] be normal due to the larger canshaft and stiffer springs , however best to check the oil pressure first and get another opinion in person by someone with a solid mech...
-
I have just purchased a brand new Cruze SRI and I'm interested in the Mace upgrade tune, my only concern is will the dealer pick up that any of this has been done when it goes in for servicing?
If you were to leave performance tune in the Cruze when you took it in to the dealership for servicing, and they had to drive it, I can assure you that they would know that it wasn't an ordinary Cr...
-
I have just purchased a factory L67 supercharger setup but no ecu, what do I need?
Beside modifying the factory ecotec wiring loom to suit, you won't need to do anything else except install an appropriate memcal in you factory ecotec computer.
-
I have just purchased a powerdyne supercharger for my Ute and I was interested in ordering the crank pulley so the belt from the supercharger can line up with the crank, can Mace supply me with this product?
We can supply you with the Power bond L67 harmonic balancers (assuming you have a V6 engine), however we are not 100% certain if this is the correct item to suit. Your best bet would be to contact ...
-
I have just purchased an automatic 2007 crewman running the alloytec engine, I intend to use it to tow a small van (900kg). From what I have read these motors lack torque for towing or torque is developed too high in the rev range for the gearing it comes
A recalibrated PCM would help with your requirements as shown in the link below: http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/COMP621 However, a much bet...
-
I have just started hearing a noise on my Sprintex Supercharger. Its on a Landcruiser 100 series 4.5 petrol. Do you have a rebuild kit for this type of supercharger?
Unfortunately, it's not a brand of supercharger we have any support for at this point in time. Our advice would be to contact Sprintex superchargers direct, as shown in the link below: http://www....
-
I have Mace's A2A plate in my L67, is is there another charger that will fit on or only the M90.
Provided an adaptor plate is made to suit, then a different supercharger can be installed on our A2A intercooler plate. Please note that you'd still need to confirm that the overall size of the pro...
-
I have made a mistake. I wanted to purchase the 25mm plenum spacer to suit an ecotec, instead of the 12mm version. Could I just pay the extra into your paypal and organise this ASAP?
If you have a boosted ecotec then we would recommend going with the 25mm plenum spacer. If this is the case then we'll organise a paypal invoice such that you can make payment for the difference. O...
-
I have no idea where the Power Pro Flash tuning cable plugs in? Do you have a diagram or can you let me know where to start looking.
The Power Pro Flash tuning cable supplied plugs into the OBDII port which is located around the bottom edge of the dash near the bonnet release and pedals, facing downwards. To be able to clearly s...
-
I have noticed on your website something about cams I don't know much about them but is it worth doing on my car? Wanting better performance so if you have any ideas please suggest?
Yes, we have performance cams to suit your car. In regards to whether they are worth doing on your car, we first require more information regarding your budget and desired outcomes from the car. Ot...