Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
I’m upgrading to Yella terra 1.9 rockers soon; can I use the Mace Manley chrome moly performance retainers (part # SPG604) with stock springs?
I would not recommend this as the installed height would be wrong with the factory springs Either you leave the retainers, or replace the springs and retainers.
-
I’ve been following a thread on the G8Board.com website with avid interest. It’s about a guy who has the screen name of Hazer and he got a tune from you guys for our engine up here. My question is, is the tune a ghost tune? I use the dealership for my mai
In regards to the calibration that we offer it's transparent, in that the dealership cannot tell if the car has been flashed with a custom tune before In saying this though, I would recommend flash...
-
I’ve done a bit of research and found out that what I'm doing is a super charged conversion but it’s not your regular l67 that's based on the ecotec block it’s a series 1 L67 that's based on the VN-VR Series 2 Buick v6 it uses a smaller s/c then Eaton M6
Unfortunately, we can't supply you with a custom made intercooler plate to suit your M62 supercharger.
-
I’ve got a raptor charged Ute (175kw, manual) making 219rwkw. Do you think a Cam package would take it to approx 249rwkw or could it go higher because of the charger?
You should achieve such power gains, if not even higher gains because of the charger (assuming the camshaft is installed and adjusted correctly.
-
I’ve got a supercharged V6 VT with a stock L67 engine in it which I use for my every day road car. I’m going to rebuild it and put a stage 3 crow cam in it and change the valve spring but besides that its stock.
Unfortunately, the stage 3 Crow cam is designed for a Naturally Aspirated engine and isn't suitable for the L67. We can supply our Comp Cam package to suit the L67, please follow the link below: h...
-
If 25mm insulators are fitted to the VE commodore LF1/LFW/LFX and then I want to fit an OTR CAI won't the elevated manifold not allow fitment of the CAI ?
From experience with the MACE/VCM OTR and Orssom OTR, they're compatible with our 25mm manifold insulators due to their rubber/silicone joiner design.
-
If I bought an ecotec cam on its own could I get the factory computer tuned? or would I still need the computer and cam package?
If you were to purchase these cams by themselves you could certainly get your current computer/memcal reprogrammed to suit depending on the model Commodore you have.
-
If I bought the supercharger pulley removal tool. Will it fit the removal of a holden VY V6 supercharged pulley (eaton m90 I believe its called).The pulley is stock and I will like to replace it with a smaller 10psi pulley.
If you were to purchase or loan our supercharger pulley tool, as shown in the link below, then it would be suitable for your application. Pulley Removal And Installation Tool https://www.maceengine...
-
If I buy MACE STAGE 2 PERFORMANCE CAM PACKAGE HOLDEN L67 SUPERCHARGED 3.8L V6, will it go into my 98 VT L67 stock engine or do I need to do anything else to my motor?
Gaskets and fluids aside, you will need a custom tune to suit the cam.
-
If I buy the stage 2 cam do I need to upgrade the push rods and lifters?
Assuming that you're on a tight budget, and your current lifters and pushrods are in good working order, then I wouldn't worry about upgrading them. Other items to consider upgrading though would b...