Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
Will the LS1 THROTTLE BODY ADAPTOR TO SUIT VN-VY V6
In theory, it should fit without any problems, due to the bolt pattern being the same and the position of our throttle cable bracket. This aside, please note you'll either need to run an LS1 thrott...
-
Will the Mace CAI for VS v6 fit and work with the VS V8 as I bought a Mace CAI ages ago for my VS v6 and now I own a VS V8, or it’s totally different design/parts etc?
The main difference between the kits is that the V8 needs a section of a convoluted hose to join the throttle body to the filter adapter tube. This aside, the filter neck and filter adapter tubes a...
-
Will the OTR Cold Air Intake To Suit Holden VT - VZ LS1 V8 fit 2001 WH HSV Grange?
Assuming that you have a VT 5.7L then it would suit your vehicle. Please note that this OTR is specifically suited for MAFless setups, meaning if you're still running the MAF, you'd need this remov...
-
Will the ultra high ratio roller rocker fit under the stock VT V6 rocker covers?
They will.
-
Will the VT Series II to VF V8 powerbond balancers be ok for a VX SS V8?
The balances that will fit your VX SS running an LS1 V8 are shown in the links below: PB816 http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/PB816/SubProducts...
-
Will the vz v6 cam upgrade give it a lumpy sound or not?
They do. To give you an idea as to how these cams sound, please refer to the youtube clip in the link below: http://www.youtube.com/watch?v=c-bZmgKEaIM
-
Will the COLD AIR INTAKE TO SUIT HOLDEN VT-VY LS1 V8 MAFless, fit on my standard WH Statesman? The only modification it has is extractors.
This item will fit your WH but it is designed for a MAFless set up. If you still have a MAF than you will need a MAFless tune done to be able to fit it.
-
Will these CAMSHAFT ALIGNMENT TOOLS TO SUIT HOLDEN VZ VE VF ALLOYTEC SIDI 3.0l 3.6L V6 work on a 6/2011 LFW 3.0L SIDI engine?
Yes, they certainly will.
-
Will this HOLDEN RECALIBRATED ECU/PCM VT II - VY II LS1 V8 tune work on a LS1 in a 2001 VU S series ute?
Assuming your car has bolt on mods (excluding forced induction), then this upgrade would be suitable.
-
Will this product, HOLDEN INLET MANIFOLD GASKETS TO SUIT V6
Given you have a Buick V6 engine, it won't fit unfortunately, as they're designed to fit only Ecotec and L67 engines.