Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
My mate has just given me a mace 12mm plenum spacer and 12mm manifold insulator for my VS V6 Commodore but has given them to me by themselves, I read that you need rail spacers or something as well?
That is correct. The details for the required fuel rail spacers are shown below 12.7mm long spacer tube with a 10mm OD and a 7.6mm ID (Part No: MI601-2) Qty:4
-
My mates and I are building a VS V6 burnout/track/weekend car. We were looking at the Stage 3 COMP Cam packages we want the sound to be real lumpy, will that help?
You'll be happy with the sound of our Stage 3 COMP Cam, considering how well our Stage 2 item sounds. http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/CAM601...
-
My name is Jaimie and I've got a 2010 sidi sv6 I would like to get more information on your tune packages
To give you a greater idea about our tune packages, please refer to the links below: http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/PPF601/SubProducts/PPF6...
-
My new ecotec/L67 I got the 1.9 roller rockers installed and two of them have a little play up and down.Is that normal or should I tighten them up abit more? I torqued all of them to 23 nm.
They should have a small amount of axial play (side to side motion parallel with the trunion/fulcrum shaft), to assist with centralising itself during operation. When the rockers have been properl...
-
My older brother just recently bought a 1999 WH statesmen V6 ecotec and is stock standerd. Do they use a memcal chip or a reflashable ECU/PCM unit?
Given that it's a 1999 model, it would run a memcal. We have memcals which would as shown in the link below: http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/...
-
My partner has a 2011 cx7 non turbo. The fuel economy is terrible to put it politely and i am after any solution to help that out. I am struggling to find any Australian companies that supply an alternative tune or simply a CAI. Do you know of anything th
Unfortunately, we don't have anything to suit, nor do we know of anyone who would.
-
My V8 - although 22 years old - has only 160,000 Kms. No harmonic balance noise, just the oil leak around it. Could the oil leak be due to a faulty or worn out seal or gasket on the balancer? And would your standard OEM balancer stop the leak around this
Good to see the Holden 5L are still going strong :) I would be more inclined to think that it would be the oil seal in the timing cover that would be the problem. Unless there was a grove worn into...
-
My vehicle is intercooled and has had several modifications done and runs app 220RWK. (Roller rockets, Cat back exhaust, extractors, intercooled although it does not take in a full air flow but runs 17psi pulley) My supercharger has not been touched and i
The supercharger will need to be removed and stripped down then the supercharger casing and the LIM (lower intake manifold) will need to be sent to us. Please ensure when the items are sent that yo...
-
My VT 5L V8 has a twin 2,1/2 inch system and a k
These mods would work with an upgraded memcal well. The only thing that we would recommend though would be to clean your MAF. To give you an idea as to the process, please refer to the link below: ...
-
My VY commodore has a stock engine was wondering will I gain anything if I were to install Mace ULTRA HIGH RATIO ROLLER ROCKERS FOR ECOTEC AND L67 V6?
With the 1.98:1 ratio rockers you'll be able to achieve gains of around 16 to 26kW. Please note as you have a VY V6, these rockers aren't suitable without modifying your cylinder heads We can howev...