Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
Just wondering if Mace offer any cooler thermostats for 89 VN Berlina 5.0L, if so how much?
Unfortunately, we don't have any cooler thermostats to suit Holden V8s at this point in time. This may change in the future though.
-
Just Wondering if Mace would make up a twin plenum with "BORED OUT THROTTLE BODY" either side ?
Thank you for the work offer. Unfortunately given current our workload, we're no longer available to provide custom fabrication of this nature anymore. Your best bet would be to contact a local aut...
-
Just wondering if the bore can be honed? She has a few lines in it so im wondering if it can be honed lightly or does that ruin displacement/quantity of air flow from the charger?
Unless there are heavy score marks inside the rotor housing of the blower then I wouldn't worry about it. To do the job properly the surface would need to be built up and precisely honed. Hone it a...
-
Just wondering if the mace main cap girdle will fit tbe std main caps?
These will 100% fit the standard main caps.
-
Just wondering if the Stage 1 kit from the HOLDEN EFI V8 5L CAM
It would certainly help. In saying this though, to be able to best select a cam kit under these conditions, it would depend on the revs that the car currently sits at under these conditions(?).
-
Just wondering if the VE Remote Flash tune is possible for my 2008 alloytec sv6? Everywhere else I've enquired hasn't been able to tune this particular model of the VE's. Only able to offer piggy back systems like the EXED.
Our remote tuning service can reprogram your 2008 VE V6 Commodore, without the need for using a piggyback/interceptor computer. For further details about this service, please refer to the links bel...
-
Just wondering if you guys still do twin throttle body set ups for ecotec v6?? And a price if so??
Unfortunately, we stopped manufacturing those due to a lack of demand. Also, we have found that you can get approx 90% of the gains by using our 25mm manifold and 12mm plenum spacers as well as our...
-
Just wondering what my rev range will be with PERFORMANCE COMP CAMS TO SUIT HOLDEN 3.8L ECOTEC V6 VS VT VX VU VY ? So I can purchase the right stall convertor?
From around 2500 to 6500RPM. From experience, we would be leaning towards a 2800 to 3000RPM stall converter. In saying this, I would also ask your stall converter builder for advice based on the ca...
-
Just wondering what size the piping hole is on the VY airbox you guys sell?
The size of the hole for the piping in our V6 CAI kits is 3 inches (76mm) unless other stated.
-
Just wondering will this COLD AIR INTAKE TO SUIT HOLDEN VR-VS V6 fit on to a supercharged V6 statesman?
If you're referring to the kit, as shown in the link below, then it will fit a supercharged V6 VS Statesman: http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectID=1469505