Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
What parts are supplied with the HOLDEN EFI VX-VY V6 ECOTEC CAM AND COMPUTER PACKAGES?
These cam computer packages contains a new high-performance camshaft and reprogrammed computer to suit.
-
What piping comes with CAI kit? Which would suit?
You would need to use the factory intake pipe from the original airbox to the intake manifold. We only supply a short pipe in the kit that goes from the pod filter to the MAF. For more info, pleas...
-
What power gains can I expect from COLD AIR INTAKE and MANIFOLD INSULATOR to suit ALLOYTEC
Generally, you're looking at improvements in power production by 10% down low. For dyno results, please check out the link below: http://i994.photobucket.com/albums/af67/mace_admin/ALLOYTEC_DYNO_ma...
-
What power gains could be expected if I installed a cold air intake, High ratio roller rockers (1:9:1), plenum spacer 12mm, 25mm cold air intake manifold insulator, 69mm bored out throttle body and a recalibrated PCM to suit these upgrades on my VY v6 eco
With these modifications we would expect to see a gain of about 20-25kw gain peak power, however that's only half the story, you'll also notice great improvements in throttle response and low-mid r...
-
What rockers are recommended with a comp cam?
Assuming you're referring to the family of COMP Cams that we offer, as shown in the links below, then we generally recommend using standard rockers unless aiming to achieve a valve lift of over 0.6...
-
What rockers do you think will be the best wiv a comp cam?
Assuming you're referring to the family of COMP Cams that we offer, as shown in the links below, then we generally recommend using standard rockers unless aiming to achieve valve lift o...
-
What size are the in/outlets for the L67 mini blizzard intercooler plate?
They are 3/8 of an inch.
-
What size hoses connect to the catch can to suit Alloytec SIDI LY7 LWR LLT LFX 3.6 V6?
They run 8mm vacuum lines.
-
What size is the inlet to the LS1 THROTTLE BODY ADAPTOR TO SUIT VN-VY V6
The standard size of the outlet to the TB Adaptor is 69mm, which is identical in size to that diameter of the factory supercharged elbow inlet. Fortunately the adaptor, along with the elbow, can ea...
-
What size manifold insulator and spacers you can put on a VS ecotec with the engine cover on and still be able to shut the bonnet?
The highest that you can raise the manifold without having to remove your engine cover would be approximately 14mm, therefore you would only be able to install one spacer.