Michael
- Total activity 4127
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2167
Articles
Recent activity by Michael-
Is there any need to alter the timing chain with an aftermarket camshaft in a VE SV6?
Not at all. The standard design chains are 100% compatible with these kits.
-
Is there any number mentioned on the MACE High Voltage Ignition coil pack to suit Buick Ecotec & L67 VNII VP VR VS VT VX VY that where its going to?
Every coil is identical, it's where they are positioned and the what leads clip on to them that should be noted.
-
Is there any possibility offitting the ORSSOM OTR COLD AIR INTAKE TO SUIT ALLOYTEC 3.6L V6 on a VZ SV6 car? If not what would be the best intake set up?
Not possible, sadly. I would recommend this intake for your requirements: http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/CAI609/SubProducts/CAI609
-
Is there any way I can get a demo of the improvements from the Mace Tune on my Cruze SRI?
We personally wouldn't be able to offer you this service, however, we may be able to supply you with some details of our Melbourne customers who may be able to give you more of an insight into the ...
-
Is there any way to tell what ratio your rockers are as I have pulled out a set of rockers from my mate’sengine and want to know what ratio they are?It has crow cam push rods 7.050" long and .080
The way to exactly tell is if you send a birds eye view photo of the push rod cup. We can then determine the ratio of these rockers. However generally speaking rockers which come with push rods are...
-
Is there anything else needed for the thermostat? Do have to run a tune to suit for the thermo fans Or can I just place it in and go?
Nothing else is required to run the thermostat. You can install it and go. However, for greater cooling gains you could get the tune re-calibrated such that the thermo fans can come on at a lower o...
-
Is there many differences between VS-VX and VY V6 throttle body?
The main difference is that the IAC valve port is larger on the VY V6 throttle bodies compared with the earlier throttle bodies. As a result you cannot use an earlier V6 IAC valve on a later model ...
-
Is there much difference in gain in MACE MANIFOLD PLENUM SPACER KIT TO SUIT NISSAN VQ35DE 3.5L V6 12mm and 8mm?
At the expense of a strut brace to support the thicker spacer, probably not.
-
Is there much extra gain by putting on the 25mm manifold insulator over the 12mm manifold insulator I have on now on my VE Alloytec?
Generally speaking, you would be looking at improvements in torque by around 10% and 13% for the 12 and 25mm manifold insulators respectively. The feedback people have given us by upgrading from th...
-
Is there much of a performance difference to be expected with LPG VS petrol when using one of Mace's memcals on my 1998 VT V6 ecotec?
The performance gains with our memcal as a percentage would be similar when running either LPG or Petrol.