Siya
- Total activity 2783
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1360
Articles
Recent activity by Siya-
Would the 25mm fit in the Adventra?
They would fit in Adventra, assuming it doesn't run a strut brace.
-
How Can I Improve My SIDI Holden V6's Acceleration Off The Mark Such That It Takes Off Quicker?
If you want it to take off quicker then a set of manifold insulators, higher diff gear ratio, air intake upgrade and tune would certainly help out.
-
The CPR6 manifold is manufactured from high-quality automotive-grade cast alloy and is designed to deliver significantly better breathing and airflow compared to the stock manifold. It provides the Alloytec V6 with a smoother, cleaner intake path, resulti
Our manifold insulators and plenum spacers are manufactured from a high-quality, heat-resistant thermal composite plastic. This material is specifically designed to reduce heat transfer, improving ...
-
Would the CROW CAMS VALVE SPRINGS TO SUIT ECOTEC & L67 SUPERCHARGED V6 suit a twin turbo v6?
Depending on the rpm limit, cam and boost, you're planning on running, SPG602 from this ad should be suitable for your build. If you can provide us with these details and others, we would be able t...
-
Our manifold insulators and plenum spacers are manufactured from a high-quality, heat-resistant thermal composite plastic. This material is specifically designed to reduce heat transfer, improving intake air temperature and overall performance. Unlike som
The main difference between the manifold insulator thicknesses is the level of torque increase they provide: 6.35mm – around 10% more low-end torque, 12mm – around 13% more low-end torque, 25mm – a...
-
Will the Cold Air Intake Manifold Insulators to suit Alloytec & SIDI VZ–VE V6 engines improve power and fuel economy?
Yes, they will. You can expect gains of around 10% in power and torque, particularly in the lower rev range. Fuel consumption should also improve by approximately 0.5L/100km, depending on driving s...
-
Would the following combination to suit VE V6 ALLOYTEC give me more power: AIR HAMMER INTAKE MANIFOLD ENGINEERING INSULATOR+ ORSSOM OTR + POWER PRO FLASH TUNING?
Please note that you would only be able to go with either the Air Hammer or ORSSOM OTR kit, but not both. If you had to choose between kits as to which one would give you the greatest power gains i...
-
Would you say the L67 conversion is worthwhile?
Given the conversion cost and ease of the conversion into a Commodore, I would say yes. Especially if it was going to replace an Ecotec engine in a VS-VY Commodore, as you would still be able to us...
-
Would your V6 Cold air intakes work with a Raptor Supercharger kit?
If you have a VN-VY Commodore V6, then our cold air intake enclosure/housing would be compatible, however, they would require modification to accommodate the Raptor Supercharger kit.
-
You are offering a $50 cash back with return of the old pcm, if i send you back two of them can i get $100 cash back?
Unfortunately, we only offer a single return per PCM purchased. Therefore you would be entitled to $50 cash back.