Knowledgebase: GENERAL ENQUIRIES
How much higher does the supercharger sit, with the intercooler kit fitted? Also could a bigger cooler/heat exchanger be fitted? If my car is running a 10psi pulley and suitable belt would there be a need for another belt?
Posted by MACE Support on 30 April 2018 08:26 AM
The mini intercooler raises the blower by 25mm.  The maximum you can really raise the blower is 52mm which is the thickness of our A2A kit and our intermediate W2A kit.Raising the blower will require a new serpentine belt, however we would recommend upgrading to a smaller pulley to make use of your new intercooler.Depending on pulley and intercooler combination though, you may be able to get away with using your current belt.For more info about belt length please check out the link below http://support.maceengineering.com.au/Knowledgebase/Article/View/62/0/what-size-belt-is-required-for-my-pulley-running-the-standard-balancer

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments: