Knowledgebase: GENERAL ENQUIRIES
I bought the 6mm insulator for my m90 and probably need some injector rail extenders to suit. Does Mace offer injector rail extenders? How much will it cost? Will I need longer bolts, and a gasket to? If so I'd like to order ASAP.
Posted by MACE Support on 30 April 2018 09:58 AM
We don't but you can modify the fuel rail such that it will still work. What you need to do is cut the supporting tab on the top of the fuel rail. This will allow the fuel rail to sit/hug in the grooves of the supercharger. Ideally though you would want to use a section of flat bar with a hole in it, to clamp down the fuel rail-You shouldn't need longer bolts, however some people have replaced them with longer items during installation. You can use silicone sealant with the plate, ideally though you would want to also use the following gasket. Supercharger to Lower Intake Manifold O-Rings-Qty: 1 http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/GSK605 L67 Supercharger Gaskets-Qty: 2 http://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectPath=/Shops/mace/Products/GSK603-2

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments: